REQUIREMENT CHECK
Identify datums, critical dimensions, thread gauges, finish expectations and release criteria.
/ QUALITY CONTROL
QUALITY CONTROL FOR PRECISION TURNED PARTS
Quality control is planned around critical features, material requirements, machining stability and final release checks for precision turned parts.
DISCUSS QUALITY REQUIREMENTSSYSTEMISO 9001 quality system
TYPICAL FEATURE CAPABILITYTypical Ā±0.01 mm for suitable features, depending on geometry and material
CHECKSFirst setup, in-process and final inspection
OUTPUTInspection documents available by request
/ INSPECTION PATH
QUALITY CONTROL FOLLOWS THE PART REQUIREMENT
Critical requirements are connected to setup checks, in-process inspection and final release so important features are checked at the right stage.
SETUP CHECK
Confirm the base machining setup against the feature relationship.
IN-PROCESS CHECK
Check key dimensions while machining can still be adjusted.
SECONDARY OPS
Check cross holes, flats, tapping, deburr and cleaning after the operation.
FINAL INSPECTION
Check final dimensions, threads, cosmetic condition and packaging requirements.
RELEASE
Pack and release parts according to agreed documentation and handling needs.
/ INSPECTION PROOF
INSPECTION MATCHES THE FEATURES THAT CONTROL FUNCTION
Each row connects a controlled feature with the inspection method used during production and final verification.
DIAMETERS AND FACESOD, ID, shoulder and face relationships that affect assembly.
THREADS AND BORESUsable depth, gauge condition, bore fit and relief features.
EDGES AND CLEANLINESSBurrs, chips, handling marks and final part condition.
DOCUMENTSInspection scope and material documentation can be prepared by request.
/ ACTIVE QUALITY VIEW
INSPECTION METHODS FOR CRITICAL FEATURES
Different inspection methods support dimensional checks, thread gauges, optical measurement and corrosion-related checks when required.
/ QUALITY CONTROL STEPS
QUALITY CONTROL FROM MATERIAL TO RELEASE
Quality control follows the part from material verification through setup inspection, in-process checks, final inspection and packing.
MATERIAL VERIFICATION
Material grade, supplied material information and finish requirements are checked before production starts.
FIRST-PART / SETUP INSPECTION
Initial dimensions and key features are checked against the approved requirement and setup plan.
IN-PROCESS INSPECTION
Key dimensions, thread features, burr-prone areas and process-sensitive CTQs are checked during production at the agreed sampling rhythm.
FINAL INSPECTION & PACKING
Completed parts are checked for required dimensions, threads, finish condition, cleanliness, labels and packing protection before release.
For suitable geometry, material and feature access, typical Ā±0.01 mm can be used as a practical machining reference. Final tolerance depends on the part feature and inspection method.
Critical features are checked with suitable tools such as gauges, micrometers, calipers or optical measurement depending on the feature and tolerance.
Yes. Cross holes, threads, deburring, finish and cleaning are checked after the operation that creates the feature.
Inspection documentation can be prepared by request. The scope depends on the controlled features, quantity, tolerance level and documentation requirement.
/ QUALITY REQUIREMENTS
ALIGN INSPECTION REQUIREMENTS FOR YOUR PART
Define material, quantity, tolerance notes, finish requirements and inspection expectations so quality control is aligned before production.